For a fast, neat activity when trimming laminate or getting a pleasing edge profile, not anything beats a compact router. Maximum are lovely simple to organize and control, and would possibly accept reasonably numerous bits to reshape your global. Making existence even more effective, some battery-powered models have pop out in recent years, which means that no additional getting tangled in cords. One of those cordless routers was once made by means of Ridgid, and it had very good power and choices. Technology keeps surging ahead, even supposing, and the oldsters in Orange in recent years introduced their latest support: The Ridgid Octane Cordless Router. Be part of us as we take it for a high-speed spin.
The new Ridgid Octane cordless router appears to be very similar to its predecessor, the Ridgid R86044. Every are powered by means of brushless motors, and the older fashion is still a actually capable software. The Ridgid Octane cordless router has merely raised the bar slightly, even supposing.
In reality really feel the need for tempo? Top tempo at the Ridgid Octane cordless router is 20% faster than the sooner model, cranking out 30,000 RPM vs. the older fashion’s 25,000 RPM. One different very welcome boost to the Ridgid Octane cordless router is its dust extraction port. Ridgid says the port will divert up to 95% of the dust churned out by means of the those rapidly-spinning bits.
An important difference, even supposing, is inside the new router’s thoughts. The Ridgid Octane cordless router is optimized to benefit from the added power and choices of Ridgid’s Octane line of batteries. Using the new router with an Octane battery kicks up the ability by means of 15%, in keeping with Ridgid. Proper right here’s a listing of choices for the Ridgid Octane cordless router, followed by means of a charged-up video from Ridgid at the Octane battery lineup:
• Up to 15% additional power than previous models (R86044B, RIDGID 18-Volt Cordless Brushless 1/4 in. Compact Router with Mounted Base and Device Unfastened Intensity Adjustment)
• Vacuum Dust Chute: Removes sawdust on paintings piece when appropriately attached to 1-1/4 in. or 1-7/8 in. sizes
• Speedy Release Lever and Micro-Keep watch over Dial: 2-ways for easy intensity adjustments
• SOFTStart Technology is helping prevent gouges on paintings flooring and extends motor existence
• Extended runtime compared to previous models (R86044B, RIDGID 18-Volt Cordless Brushless 1/4 in. Compact Router with Mounted Base and Device Unfastened Intensity Adjustment)
• Lifetime Provider Agreement with registration inside of 90 days of purchase
• Is composed of: (1) R860443 18-Volt OCTANE Brushless Compact Router, (1) sq. base, (1) round base, (1) detachable dust port, (1) edge knowledge, (1) 1/4 in. bit, (1) collet wrench, and operator’s guide
• Assembled Intensity: 5.88 in
• Assembled Most sensible: 7.25 in
• Assembled Width: 3.50 in
• Collet measurement: .25”
Bag It, Danno: What’s In The Box
Once I opened the sphere for the Ridgid Octane cordless router, I was shocked to find a just right bonus no longer indexed inside the specifications above. The router and other parts had been nestled conveniently inside of a soft-sided garage case. While my need is for a hard-sided case, many tools correct this second come with no case the least bit, so it’s a welcome boost.
The principle instance, in reality, is the Ridgid Octane cordless router itself. While it weighs only 2-1/2 pounds, it feels very solid and really extensive, and has the heft and glance of a well-made software. The motor rests contained within the mounted base, with the sq. base plate attached. A round base can be incorporated.
Now for the sweets. Shoppers who prefer their paintings spaces no longer be covered in sawdust will likely be very satisfied to look the dust port, which is in a position to hook up with any 1-1/4” or 1-7/8” hose. And anyone who can’t freehand a perfectly immediately line (my hand is up) will love the edge knowledge.
To round out the collection of sweets, moreover they tossed in a pleasing round-over bit. Once more to the mundane, there’s moreover a collet wrench, which might change into helpful one day, and a shopper’s guide.
Getting Ready To Make The Ridgid Octane Cordless Router Spin
As it’s a cordless software, the obvious first step in firing it up is to place in a battery. The router will serve as with maximum Ridgid 18V batteries. If your function is to maximize its doable, for the reason that inspirational audio device choose to mention, you’ll want to power it with an Octane battery. As quickly because the battery is in position, powering up the Ridgid Octane cordless router is done by means of pulling out the ability alternate. Pushing it once more in shuts the router down, which takes only some seconds. The alternate is in most cases a little bit awkward to get to, alternatively I believe it’s an excellent from a safety point of view, in that it’s not going the router will likely be powered on accidentally.
I was concerned that if the alternate was once set to the ON position with the battery eradicated, the router would hearth up when a battery was once installed. I tested this scenario various circumstances, even supposing, and the router merely sits there in a position patiently so that you could power the alternate OFF and then ON another time. That’s a very good safety function.
Wanna pass faster? Or slower? Adjusting the router’s tempo is easy. Using the dial at the front of the motor housing, rotate it until you reach your satisfied position. The router could be adjusted anyplace along the scale from 17,000 to 30,000 RPM.
Dialing It In
Removing or repositioning the motor housing from the ground is short and easy. Merely swing the quick-release lever out, and depress and care for the motor release lever. Now you perhaps can slide the motor to the desired position, or right kind out of the ground.
Changing bits can be lovely simple. Remove the battery. Then open the quick-release lever, and slide the motor up so you could have just right access to the collet. Press the spindle lock button, loosen the collet nut with the incorporated wrench, and are available out the bit you’re finished using. Since those bits get HOT chewing by means of wood at 30,000 RPM, just right gloves or a cool-down period are extraordinarily actually helpful. Now slide inside the new bit until it bottoms out, switch it once more up about 1/16”, and tighten the collet nut.
Slide the motor until it’s more or less where you want it, with the bit situated a fragment above the paintings flooring, then release the spring-loaded release lever. Now you can also make your last adjustments using the micro intensity adjustment knob, until you’ve dialed inside the true intensity of decrease you need. Received that bit set right kind where you want it? Clamp it into position with the quick-release locking lever, slap an Octane battery once more in and get to paintings!
The Ridgid Octane Cordless Router Unearths Its Groove
For its maiden voyage, I put the Ridgid Octane cordless router to paintings carving out a three/8” deep dado in the back of slightly of ash baseboard. It was once merely the most productive measurement to hide a run of RG6 cable. Practice: In most cases, a decrease this deep might be made using two or 3 passes. To test the router’s power, I decrease the main couple of grooves in only one go. In case you occur to’d like your router to live a chronic, satisfied existence, we advise against overworking it like that.
I tightened up a three/8” intensive bit inside the collet, and slid in an strange 6.0 Ah battery to look how it is going to perform. So to get a straight-ish line, I attached the edge knowledge, which is short and easy. Since I’m a huge fan of cleanup, and for comparative purposes, I didn’t attach the dust port however.
Without reference to its “refined start” function, after I switched it on, the router bought up to complete tempo in a little while. The bit dug right kind in, and started carving out a pleasing simple channel. After about 18” or so, the Ridgid Octane Cordless Router sounded like it was once suffering slightly, and then swiftly stopped. I lifted it out, blew out among the sawdust clogging the channel, and switched it once more on. It fired right kind up, and persevered plowing by means of the wood for approximately one different 18”, at which stage it surrender another time. That’s the overload circuitry doing its activity.
At this stage, I decided that the Ridgid Octane cordless router had suffered enough, and I attached the dust extraction port. What a difference – the router chugged right kind by means of, without a further stalling. The router has very good power, alternatively the mix of an overly-large cutout and a lot of shavings had been enough to stall it out in the beginning. It is however, after all, a ¼” pressure battery powered software.
Getting Edgy With The Ridgid Octane Cordless Router
One different provide problem involves putting in place and trimming out a number of new house home windows. Once another time, the nature of the problem house provides plentiful choice to hone my customization experience. Every window needs extension jambs, and just about each and every window opening is just a fraction utterly other. The house home windows arrived with unfinished inside of surfaces, and we’ve been staining and polyurethaning them to check present trim. It might sound tedious alternatively…in reality, certain, it IS tedious.
All the house home windows are being trimmed out in 1×4” oak. The inside edges of the house home windows have a recessed house about 3/16” deep, to allow the jamb extensions to be recessed for a better-looking fit. Unfortunately, no longer they all are intensive enough to deal with the full ¾” width of the trim. Time for some Ridgid Router Rabbet Rotation.
Using the edge knowledge another time, I set the router up to carve out a work more or less 5/16” intensive and deep along the edge of the trim. I clamped the board down, connected the vac to the dust port, and started making sawdust.
The Ridgid Octane cordless router moved slowly and often by means of the oak, without a bogging down or hesitation. Even with a pause or two along the best way by which to reposition the clamps, the trim was once quickly right-sized. As quickly because the downsizing was once finished, the trimmed edges fit utterly into the recessed house. I connected the trim pieces at the side of pocket screws, and nailed all of the shebang to the wall. After that, it was once off to measure for the NEXT batch of custom designed trim.
All my previous experience with routers has been with corded models. While they undoubtedly get the activity finished, the ability to do laminate trimming, edge routing, and other jobs without fussing with a cord made doing these kinds of tasks a LOT more effective. The Ridgid Octane cordless router is a solid, pro-grade software, simple to use and adjust, and the very atmosphere pleasant dust port is icing at the cake. With out a sawdust in it.
So correct right here’s the massive question: In case you occur to already private the older Ridgid router, is it worth upgrading? And in the event you don’t have the former router, which is the upper bet to shop for? Hmmm, ok, that’s two questions. For question #1, the answer calls for you to do a little contemplation. Have you ever ever been glad up ‘til now with the former router’s potency? How in most cases do you utilize it, and is a 15% support in power and a 20% tempo support worth $99? Ah, alternatively there’s moreover the sporty dust port, complicating the selection…
For any individual who DOESN’T private the earlier model, I’d definitely lean against the new Octane fashion. It comes very correctly geared up, or even in the event you don’t put money into Octane batteries to power it instantly, it’ll paintings very correctly on an strange Ridgid battery. The price is first price, and once another time, the dust port is the clincher.
No Power Combat With The Ridgid Octane Cordless Router
For any reasonable procedure, the Ridgid Octane cordless router has a lot of power, and battery existence was once wonderful. Once I started keeping the channel clear of sawdust, the router had no trouble making a huge 3/8” x 3/8” decrease with an strange Ridgid 5.0 Ah battery. After switching to an Octane battery, I had no issues with any cuts.
In case you occur to’re a power shopper, you could perhaps ponder stepping up to an Octane battery, as Ridgid is continuously expanding its lineup of Octane-optimized tools. Ridgid introduced us with a actually helpful Octane battery starter bundle to use for our trying out. The bundle is composed of three.0 Ah and six.0 Ah Bluetooth-enabled Octane batteries, at the side of a charger and – certain – one different bag to stow it all in!
Ridgid backs the Ridgid Octane cordless router, and the Octane battery starter bundle, with its Lifetime Provider Agreement; merely sign in the tools inside of 90 days of purchase. The Space Depot’s go back protection supplies you a risk-free choice to use those 90 days to look how edgy or groovy you could be. And now’s a great time to offer it a try – they in recent years put the router to paintings trimming its private worth down by means of $30, to $99, which means that it’s in reality less expensive than the older fashion!
Acquire the Ridgid Octane Cordless Router from the Space Depot:
Ridgid Octane battery starter bundle with charger, bundle bag, 3.0Ah and six.0Ah batteries: